Monday, November 29, 2010

Christmas Bead necklace



 More about the Christmas bead necklace posted in November
I found this fun post by FROO*GAL on how to make a cloth bead necklace.  She has great instructions on how to create one of these.  Check it out!  So, I thought I would try making this in Christmas fabric.  
What I used:
I chose 3 green and 2 red Christmas fabrics  
I cut out 2 rectangles (size 1-1/2 x 3" each) for each color plus one extra red one to make a    total of 6 green and 5 red covered pieces
Glue stick
20 mm wood beads with large hole (Like Froogal I found these at JoAnn Fabrics ($3.98 for 30)
Choice of ribbon (I used 1/4" wide)
Size 16 Tapestry needle (which I already had, but I think a slightly smaller one would work 
Toggle closure
Did not use an awl because I don't have one - but I do think it would help.
It's best to work on top of paper or wax paper when glueing the cloth to the bead.  I rub the glue stick all over the fabric swatch.  Then fold one edge over about 1/8" or less (Less worked better for me)
Place bead in middle with the holes facing out as pictured
I  wrap the fabric around the bead making sure the folded over edge overlaps the raw edge.   Then, I used the eye end of the Tapestry needle to work the ends into the holes.  This took a little practice so,  if you mess up,  just remove the fabric and try again.  But you end up with something like this:  Hopefully yours  looks lots better than mine!
Once all eleven beads are covered, it's time to thread the ribbon!  For a 20 inch necklace I cut a 30 inch piece of ribbon. but I came out shorter than I wanted so I will add extra just in case next time.  Thread the ribbon through the Tapestry needle and then thread the needle through the bead. I had to use needle nose pliers to get the needle and ribbon all the way through.  But this is where I think it would be easier if the needle were just a bit smaller.  I worked from one end of the strand to the other, but I imagine you could place the first bead in the middle and work out from there.  If you are working from one end, then place the first bead 7 inches from the end of the ribbon.  Tie a simple knot around each side of the bead, making sure you keep it close to the side of the bead.  Then thread another bead on the ribbon and make another knot.  Continue until all beads are on board the ribbon!
Then attach the Toggle clasp however you like.  I simply tied each end of the necklace to the Toggle clasp.  And there you have it - 
My first attempt!  There are lots of possibilities here...


Funky Junk's Saturday Nite Special Join us Saturdays at tatertotsandjello.com for
 the weekend wrap up party! Photobucket The DIY Show Off Thumbnail for 'Made By You Monday'     Photobucket  http://linda-coastalcharm.blogspot.com/Running With GlitterSYS Thurs Transformation ThursdayThe Shabby Nest Chic on a Shoestring Decorating French Country Cottage Designer Garden Button    Visit thecsiproject.com

2 comments:

  1. I LOVE THIS!!! I was just going through all my mother's old craft stuff and came across some baggies with beads and ribbon. I wanted to see how other people had done the bead/ribbon necklaces, and I came across your picture in Google images. I think this idea is fabulous and I may use it.

    ReplyDelete
  2. Thank you Carolyn! I actually got lots of compliments on this necklace. By all means make one with your Mom's old beads and ribbon! I'd love to see what you create with them :)
    Happy Holidays!
    Mimi

    ReplyDelete

I am so glad you are here! Please leave a comment or note or whatever it takes so I can get to know you too!

LinkWithin

Related Posts Plugin for WordPress, Blogger...
Pin It button on image hover